BAYROL SpaTime pH-Plus, 1 kg
BAYROL SpaTime pH-Plus is a fast-dissolving alkaline granule product designed to increase the pH of spa pool and hot tub water when it falls below 7.0. Maintaining the correct pH level is essential for effective water disinfection, balanced water chemistry and comfortable spa use. The product dissolves quickly, does not cloud the water and leaves no residue.
Key features
-
Fast-dissolving alkaline granules.
-
Designed to increase spa water pH.
-
Quickly and accurately adjusts water pH.
-
Dissolves completely without leaving residue.
-
Does not cloud the water.
-
Easy to use.
-
Suitable for all types of spa pools and hot tubs.
-
Compatible with all BAYROL SpaTime water treatment products.
When to use?
-
When the spa water pH is below 7.0.
-
After topping up the spa with fresh water.
-
During regular water testing.
-
To maintain the recommended 7.0–7.6 pH range.
Dosage
Recommended dosage:
-
10 g per 1 m³ of water increases the pH by approximately 0.1.
The exact amount required depends on the water hardness and alkalinity.
Instructions for use
-
Check the spa water pH at least once a week.
-
If the pH is below 7.0, calculate the required amount of product.
-
Switch on the circulation pump.
-
Add the required amount of granules directly into the spa water while the circulation system is running.
-
Leave the circulation pump running until the product has completely dissolved.
-
Measure the pH again and adjust if necessary.
Compatibility
-
Suitable for all types of spa pools.
-
Suitable for hot tubs.
-
Compatible with all BAYROL SpaTime water treatment products.
-
Suitable for both indoor and outdoor spas.
Pack size
-
1 kg
Active substance
-
Sodium carbonate.
Warning!
Use pool chemicals safely. Always read the product label and instructions before use. Add the product only to the water while the circulation pump is running. Never mix different water treatment products in their concentrated form. In areas with very soft water, it is recommended to check the pH more frequently.
