BAYROL Chlorifix – fast-dissolving chlorine granules designed for shock disinfection of swimming pool water. The product is used to address water problems when the water becomes cloudy, turns green or when the active chlorine level needs to be increased quickly. The high-quality granules dissolve rapidly in water and leave no residue.
Key features
- Fast-dissolving chlorine granules.
- Designed for shock disinfection of swimming pool water.
- Quickly increases the active chlorine concentration.
- Suitable for treating cloudy and green pool water.
- Leaves no residue and does not clog the filter.
- Suitable for all types of swimming pools.
- The stabiliser contained in the product helps reduce chlorine degradation caused by UV radiation.
When to use?
- At the beginning of the pool season for initial disinfection.
- When the pool water becomes cloudy.
- When algae appear in the pool water.
- After intensive use of the pool.
- After heavy rainfall or very hot weather, when the correct disinfection level needs to be restored quickly.
Dosage
Initial and regular disinfection:
- 50 g per 10 m³ of water.
Shock disinfection in case of water problems:
- 200 g per 10 m³ of water.
A higher dosage may be required in case of heavy pool use, high water temperatures or after heavy rainfall.
Instructions for use
- Before use, check that the water pH is between 7.0 and 7.4.
- Switch on the filtration system.
- The required amount of product may be added directly to the pool water, provided that the following conditions are met:
- the circulation pump must be running;
- add the granules in front of the water inlet nozzles, where the water flow is strongest, or distribute them evenly across several areas of the pool.
- If the pool has a PVC liner or a painted surface, to help prevent bleaching marks, it is recommended to add Chlorifix through the skimmer or dissolve it first in a plastic bucket of water.
- It is recommended to use the product in the evening after swimming has finished.
- After application, leave the filtration system running for at least 12 hours.
- Swimming is only permitted once the free chlorine concentration has fallen below 3 mg/l.
Compatibility
- Suitable for all types of swimming pool filtration systems.
- Suitable for all types of pool surfaces.
- Suitable for use in both indoor and outdoor swimming pools.
Pack size
- 1 kg
Active substance
- Sodium dichloroisocyanurate dihydrate (stabilised chlorine).
Warning!
Use biocidal products safely. Always read the product label and instructions for use before application. Avoid direct contact between the product and materials that are not resistant to chlorine. For pools with PVC liners or painted surfaces, it is recommended to dissolve the granules in a bucket of water first or add them through the skimmer to reduce the risk of surface damage.
