SPA massage pools

Novitek models with the same shell design (e.g., Halti M, Kiilo L, Salla M) are available in three configurations: Basic - standard equipment with basic massage functions and heating; Comfort - includes additional features such as colored LED lighting, an audio system, or other convenience features; Premium - all Comfort features plus additional jets; may include Wi-Fi and other advanced features. The price difference between the Basic and Premium models is typically €2,000.

Most spa massage pools operate on a single-phase 220-230 V mains voltage with a 16 A circuit breaker (Serene 2 and similar models). Higher-capacity spas with more powerful pumps or additional heaters may require a three-phase 380 V power supply or a higher amperage. When installing the spa, you may also need to consider a dedicated electrical circuit with a ground connection and residual current device (RCD) protection. Before installing your chosen spa, it is always best to consult with professionals who will not only advise you on electrical solutions but also help you install the spa from start to finish.

An outdoor hot tub is heated by wood or electricity, usually does not have massage jets or a filtration system, and the water is changed after each use. SPA massage pools have an integrated filtration and disinfection system, numerous massage jets designed to target specific areas of the body, and do not require the water to be changed after every use.

Yes. For example, Fonteyn SPA models feature high-density urethane insulation, double-wrapped exterior insulation, and a highly effective 5/4-layer walk-on cover that retains heat and allows for efficient water heating even at low temperatures. Important: At temperatures below -15 °C, we recommend additional protection or a cover so that the heater does not have to run continuously at maximum capacity.

Fonteyn SPA and Novitek pools feature an integrated ozone sanitation system designed for water disinfection and reduced chemical usage. In certain models, this system may be combined with a UV synergy system for dual disinfection. To ensure proper pool operation and use, we also recommend using pH balancers, active oxygen, and chlorine treatments, and changing the water every 3-6 months, depending on usage intensity.