Quickly dissolve chlorine granules.
Usage:
For the disinfection of swimming pool water, use the amount of CHEMOCLOR T-65 granule solution that provides the required concentration of active residual chlorine in the water.
Suitable for hard water.
A water pH of 7,0-7,4 is recommended for disinfection effectiveness.
Optimum free residual chlorine content in water: 0,6-1,0.
Dissolve the required amount of granules in water before use, slowly pouring the granules into the water, but not vice versa.
Initial dosage:
80-100 g granules / 10 m3 of pool water.
For constant maintenance of pool water:
35 g granules / 10 m3 pool water every 3-6 days.
Pour the prepared solution directly into the pool around the perimeter. Chlorination of the water is carried out when the sun goes down. Do not use the pool until the required amount of free residual chlorine has been reached.
Attention!
Consumers must comply with the occupational safety and health and waste management measures indicated on the label and in the safety data sheet.
