Cleaning kit for hot tub or spa, with filter.
This kit contains everything you need to keep your water clean.
The set includes:
1. SpaTime pool pipe cleaner, SpaTime - 1kg
2. Hydromassage Baths/Pools Cleaner, 1l, Surface Clean
3. Filter cleaner, SpaTime - 800g
Over time, the piping of the water jets can become clogged. Dirt in the plumbing absorbs the bath chemistry and this causes a variety of problems.
Bayrol water jet pipe cleaner granules penetrate deep into dirt and destroy it.
Usage.
Use before changing hot tub/pool water.
Dosage: pour 200 g/m3 SpaTime pool pipe cleaner into the filter cartridge or dispenser and let the circulation pump run for 5 minutes. If you cannot pour the product into a dispenser or filter cartridge, pour it into 5 liters of water and pour directly into the tub/swimming pool, allowing the circulation pump to run for 5 minutes. Turn off the pump. Allow the product to soak in (1 hour). Then turn the spa water circulation back on briefly. Then drain the old water, rinse and refill the tub/pool with new water. Do not use during the hot tub/pool cleaning process.
If necessary, clean the bath with the Surface Clean surface option and then fill with fresh water.
SPA TIME filter cleaner is used every 4 weeks (when the bath is used intensively - at most) and completely replace it every 6 months.
SpaTime Kartuschen-Rein is a highly effective filter choice for all filter cartridges to extend their life.
Usage and dosage:
Mix 2 caps (100 g) in a bucket filled with 5 l of water.
To dose larger filter cartridges:
4 corks (200g). (1 round cap holds about 50g). first remove any coarse dirt from the cartridge to be cleaned, then insert it
into the cleaning solution (wear protective gloves). Shake the cartridge several times. Depending on the degree of soiling, remove the cartridge after 3-5
hours from the solution and rinse under tap water.
ATTENTION! Products are harmful to health if swallowed. Severely damages the eyes. Severely affects the respiratory tract. Very toxic to aquatic organisms, causes long-term changes. Contact with acid releases toxic gases.
Warning!: Do not use with other chemicals. Wash hands thoroughly after use. It is mandatory to apply the work safety and health and waste management measures indicated on the label and safety data sheet.
Use biocidal products safely. Always read the label and product information before use.
Storage conditions: store in a cool place, but not at sub-zero temperatures. The package must be tightly closed, kept out of the reach of children, protected from direct sunlight.
