Easy Dip 3-in-1 Water Test Strips, 50 pcs
Easy Dip 3-in-1 water test strips are designed for quick and convenient testing of the most important swimming pool and spa water parameters. A single test strip measures free chlorine or bromine, pH and total alkalinity (TA). Regular water testing helps maintain proper water balance and ensures the effective performance of water treatment products.
Key Features
- 3-parameter water test strips.
- Measure free chlorine or bromine, pH and total alkalinity (TA).
- Fast and easy-to-read results.
- Easy to use.
- Suitable for swimming pools and spa pools.
- No additional reagents or testing equipment required.
- Single-use test strips.
- Pack contains 50 test strips.
When to use?
- Before the start of the swimming season.
- For regular water quality monitoring (recommended at least once a week).
- After topping up the pool or spa with fresh water.
- After intensive pool or spa use.
- After heavy rainfall.
- Before adjusting the dosage of water treatment products.
Instructions for use
- Remove one test strip from the container and close it tightly immediately.
- Dip the test strip into the pool or spa water for approximately 2 seconds.
- Remove the strip and hold it horizontally.
- Wait for the time specified by the manufacturer until the colours have fully developed.
- Compare the colours with the colour chart printed on the container.
- If necessary, adjust the water parameters using the appropriate water treatment products.
Measured Parameters
- Free Chlorine or Bromine.
- pH.
- Total Alkalinity (TA).
Recommended Values
- Free chlorine: 0.5–1.0 mg/L.
- Bromine: 3–5 mg/L.
- pH: 7.0–7.4.
- Total Alkalinity (TA): 80–120 mg/L.
Quantity
- 50 test strips
Storage
Store in the original tightly closed container in a cool, dry place. Protect from moisture, direct sunlight and high temperatures. Close the container immediately after removing a test strip. Do not touch the reagent pads with your fingers.
Warning!
These test strips are intended for water analysis only. They are for single use only and cannot be reused. Always follow the instructions on the product label and use the appropriate water treatment products according to the test results.
