FF-PIR is suitable for insulating sauna walls and ceilings, as well as ceiling surfaces in other rooms with plumbing. The insulation boards can also be used in other rooms as an internal insulation layer in structures with panel finishes. FF-PIR is suitable for use in both new construction and renovation.
Efficient and space-saving package
Due to its excellent thermal insulation properties, the amount of FF-PIR required is only about half that of, for example, mineral wool. When installed on a stone wall, FF-PIR provides more than 10 cm of additional space in the sauna room. The aluminum paper surface of the insulation boards reflects some of the heat radiation, thus improving the overall thermal insulation capacity of the structure.
Quick and easy
FF-PIR insulation boards are easy to modify and attach. The boards can be cut, milled, drilled and nailed. The insulation boards have a tongue-and-groove connection, so the insulation layer can be installed quickly and reliably. The lightweight boards are easy to handle even in tight spaces. FF-PIR is ideal for use with both stone and wooden structures.
Protects structures
FF-PIR protects against mold, as the structure of the insulation board prevents water from penetrating into the wall and ceiling structures. The final tightness is ensured by using sealing foam and aluminum tape in the board joints and inlets.
Durable and safe
FF-PIR is not damaged by moisture, shrinkage, rot or mold. It withstands hot and humid sauna conditions perfectly. Thanks to FF-PIR, the structure is always optimally sealed, tightly sealing both heat and moisture. This means that the sauna heats up safely and energy costs are reduced. FF-PIR withstands temperatures of +120 °C, but can withstand momentary temperatures of +200 ˚ C.
Purpose
Wall and suspended ceiling constructions in saunas and shower rooms, as well as wall and ceiling constructions in other spaces with panel finishing.
- Panel sizes: 600 x 1200 mm
- Thickness: 30 mm
- Thermal conductivity: λD 0.023 W/mK
- Insert and projection: Continuous insert and projection.
- Coating: Aluminum laminate on both sides of the panel.
Price for one piece.
