BAYROL Quicktest Water Test Strips, 50 pcs
BAYROL Quicktest water test strips are designed for quick and convenient testing of the most important swimming pool and spa water parameters. A single test strip measures five key values at once: free chlorine, total chlorine, pH, total alkalinity (TA) and total hardness (TH). Regular water testing helps detect changes in water balance early and ensures effective performance of water treatment products.
Key Features
- 5-in-1 water test strips.
- Measure free chlorine, total chlorine, pH, total alkalinity (TA) and total hardness (TH).
- Fast test results.
- Easy to use.
- Suitable for swimming pools and spa pools.
- No additional reagents or testing devices required.
- Convenient pack containing 50 test strips.
When to use?
- Before the start of the swimming season.
- As part of regular water quality monitoring.
- Before adding water treatment products.
- After topping up the pool or spa with fresh water.
- After intensive pool or spa use.
- After heavy rainfall or periods of hot weather.
Instructions for use
- Remove one test strip from the container and close the lid immediately.
- Dip the strip into the pool or spa water for approximately 2 seconds.
- Remove the strip and hold it horizontally.
- Wait for the time specified by the manufacturer for the colours to develop.
- Compare the colours with the colour chart printed on the container to determine the water parameters.
- If necessary, adjust the water balance using the appropriate water treatment products.
Measured Parameters
- Free Chlorine.
- Total Chlorine.
- pH.
- Total Alkalinity (TA).
- Total Hardness (TH).
Recommended Values
- Free chlorine: 0.5–1.0 mg/L.
- pH: 7.0–7.4.
- Total alkalinity (TA): 80–120 mg/L.
Quantity
- 50 test strips
Storage
Store in the original tightly closed container in a cool, dry place. Protect from moisture, direct sunlight and high temperatures. Close the container immediately after removing a test strip.
Warning!
These test strips are intended for water analysis only. Do not touch the reagent pads with your fingers. Test strips are for single use only and cannot be reused. Always follow the manufacturer's instructions and the recommendations for the water treatment products you use.
