BAYROL pH-Plus is a fast-dissolving alkaline granule product designed to increase the pH of swimming pool water when it falls below 7.0. Maintaining the correct pH level is essential for effective disinfection, proper water balance and protection of pool equipment. The product dissolves quickly, does not cloud the water and is suitable for all types of swimming pools.
Key features
- Fast-dissolving alkaline granules.
- Designed to increase the pH when it falls below 7.0.
- Quickly and accurately adjusts pool water pH.
- Does not cloud the water.
- Suitable for all types of pool filtration systems.
- Compatible with all pool water disinfection methods.
- Suitable for all types of swimming pools.
- Includes a dosing scoop for accurate dosing.
When to use?
- When the pool water pH is below 7.0.
- After topping up the pool with fresh water.
- After heavy rainfall.
- During regular water testing whenever the pH needs to be increased to the recommended range of 7.0–7.4.
Dosage
Recommended dosage:
- 100 g per 10 m³ of water increases the pH by approximately 0.1.
The exact amount required depends on the water hardness and alkalinity.
Instructions for use
- Check the pool water pH at least twice a week, as well as after topping up the pool and after heavy rainfall.
- If the pH is below 7.0, calculate the required amount of product.
- Switch on the filtration system.
- Distribute the granules evenly into the pool water in several locations, preferably in front of the return inlet nozzles, or dissolve them first in a plastic bucket of water.
- Do not add the product directly into the skimmer.
- Leave the filtration system running for 2–3 hours after dosing, then measure the pH again and adjust it if necessary.
- Do not add more than 500 g per 10 m³ of water in a single application.
Compatibility
- Suitable for all types of pool filtration systems.
- Compatible with all pool water disinfection methods.
- Suitable for all types of pool surfaces, including PVC liners, tiled pools and polyester pools.
- Suitable for both indoor and outdoor swimming pools.
Pack size
- 1 kg
Active substance
- Sodium carbonate.
Warning!
Use pool chemicals safely. Always read the product label and instructions before use. Never mix different pool chemicals in their concentrated form. Always add the product to the water and never pour water onto the product. Do not exceed 500 g per 10 m³ of water in a single application.
