Adhesive based on tetrahydrofuran, designed for swimming pools and for bonding tensile connections in pressure pipes (e.g., drinking water pipelines) with PVC-U fittings.
Clean and precise application facilitates installation and increases the durability of the adhesive.
Shake Griffon well before use. Using a brush, apply a continuous and even layer of adhesive (thinner at the pipe end, thicker at the socket end) lengthwise onto cleaned and dry surfaces. Insert the pipe fully into the fitting, ensuring that the bonded parts do not rotate, and hold them in place for a few seconds. The bonded parts must be assembled within 4 minutes of applying the adhesive. Temperatures above +25 °C or a thinner adhesive layer will shorten the open working time. Store the adhesive at a temperature between 5 °C and 25 °C.
-
Thixotropic
-
Approved for use in drinking water systems
Technical data:
-
Suitable for pipes up to 315 mm in diameter
-
Maximum pressure: 16 bar (PN 16)
-
Storage temperature: 5 °C – 25 °C
Package volume – 1000 ml
-
High-quality penetration level
-
Long service life
-
Small quantity required for high performance
-
Fast drying time
-
Does not affect aesthetics
