Water clarification

Water in private or public pools requires specific care. To enjoy clear, fresh-smelling pool water, you need to clean it properly.

Pool water becomes cloudy due to poor water filtration, too high a pH level, or a high amount of organic sediment. Washing over should be done to eliminate this problem. Chemical cleaning agents that contain a flocculant can also be incorporated. Such measures effectively clarify the water. If the results of the pH test are not satisfactory - adjust the pH level with "pH minus" or "pH plus" means. Chlorine tablets can also be used in this situation.

Deposits of calcium salts and other impurities form plaque on the walls of the pool. In order to get rid of this problem, you should drain the pool water and clean the walls with anti-sediment products. Later, it is necessary to adjust the pH level of the water and use descaling agents once a week.

In this category of water clarification products, you will find: anti-lime products that stabilize water hardness, stop the formation of calcium, prevent water turbidity, lime deposits in the pool and in the filtration system, bind metals in the pool water, and prevent the appearance of rust in the water. Also algae removing chemicals. Chemicals for both sand and cartridge pool filters that clarify the water. These chemicals bind small dirt particles to larger ones, which are collected by the filter, remove small particles and act preventively against water turbidity.